top dead centre वाक्य
उदाहरण वाक्य
मोबाइल
- At low rpm this occurs close to TDC ( Top Dead Centre ).
- Instead, it uses a crossplane crankshaft that prevents the pistons from simultaneously reaching top dead centre.
- A protrusion on the inside is hit by the piston as it approaches top dead centre, forcing the valve open.
- Diesel motor operation on the other hand inhales and compresses air only by the motion of the piston moving to top dead centre.
- The advantage of the design should have been very early ( 0-5 degrees before top dead centre ) opening inlet valve.
- Also, increased heat loss during combustion due to extended dwell at top dead centre offsets any constant volume combustion improvements in real engines.
- In a piston engine, this is the volume that is swept as the pistons are moved from top dead centre to bottom dead centre.
- It had horizontally opposed pistons, a design in which the corresponding pistons reach top dead centre simultaneously, thus balancing each other with respect to momentum.
- When the crank is driven by the connecting rod, a problem arises when the crank is at top dead centre ( 0?) or bottom dead centre ( 180?).
- At top dead centre, the piston gets very close to the flat portion of the cylinder head above, and the resultant squish turbulence gives excellent fuel / air mixing.
- The concept of top dead centre is also extended to pistonless rotary engines, and means the point in the cycle in which the volume of a combustion chamber is smallest.
- Some potential solutions to increase fuel efficiency to meet new mandates include firing after the piston is farthest from the crankshaft, known as top dead centre, and applying the Miller cycle.
- The ignition timing can then be adjusted to fire at the correct point in the engine's rotation, typically a few degrees before top dead centre and advancing with increasing engine speed.
- In an engine designed to use the squish effect, at top dead centre ( TDC ) the piston crown comes very close, ( typically less than 1mm ), to the cylinder head.
- In the conventional four-stroke petrol engine the spark plug commences to ignite the mixture in the cylinder at up to forty degrees before top dead centre while the piston is still travelling up the bore.
- A reference pointer is attached to the flywheel housing or other fixed point, and an engraved scale gives the offset between the spark time and the top dead centre position of the piston in the cylinder.
- Top dead centre for cylinder one is often marked on the crankshaft pulley, the flywheel or dynamic balancer or both, with adjacent timing marks showing the recommended ignition timing settings as decided during engine development.
- In traditional sprung-valve actuation, as engine speed increases, the momentum of the valve will eventually overcome the spring's ability to close it completely before the piston reaches TDC ( top dead centre ).
- The swept volume of the engine remains the same, but as the volume of the combustion chamber at top dead centre is changed by adjusting the contra-piston, the compression ratio ( swept volume + combustion chamber / combustion chamber ) changes accordingly.
- The infeed and outfeed tables can be raised or lowered independently of each other and in relation to the cutter head although the outfeed table is normally set so that it is level with the knives when at the top dead centre of the rotation of the cutter head.
- अधिक वाक्य: 1 2
top dead centre sentences in Hindi. What are the example sentences for top dead centre? top dead centre English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.